Additive Manufacturing Service Bureau Quoting worked example

3D Printing Quote Cost at 110% billable quote capture: a worked example

What does the result look like when billable quote capture reaches 110%? The full calculation is worked below with real intermediate numbers. an estimator needs a fast quote total before checking margin, minimum order rules, or customer approval

The inputs for this scenario

  • Billable parts or print hours: 42 parts or hr (unchanged)
  • Quoted rate: 38 $ / part or $ / hr (unchanged)
  • Billable quote capture: 110 % (raised for this scenario; the documented default is 100)
  • Setup or minimum order charge: 125 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Captured quote value = billable parts or print hours × quoted rate × billable quote capture) to the inputs above produces each figure below.
  • At this operating point the engine returns 1,881 $ for total quote cost, the number this scenario is built around.
  • At this operating point the engine returns 44.78 $ / part or $ / hr for quoted rate.
  • At this operating point the engine returns 1,756 $ for captured quote value.
  • At this operating point the engine returns 125 $ for setup/minimum charge.

How this compares with the baseline

  • Against the tool's baseline example, where billable quote capture sits at 100% and the headline result is 1,721 $, this scenario comes in 9.27% above the baseline at 1,881 $.
  • A figure at this level is achievable when billable quote capture is genuinely sustained, not just peaked for a shift. It uses one blended rate per quote; multi-material jobs, post-processing labor, and finishing tiers (dyeing, support removal, vapor smoothing) aren't broken out and must be loaded into the rate or added separately.

Results at a glance

  • Total quote cost: 1,881 $ (headline result)
  • Quoted rate: 44.78 $ / part or $ / hr
  • Captured quote value: 1,756 $
  • Setup/minimum charge: 125 $

Run it with your numbers

  • Every input above is editable in the live 3D Printing Quote Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.