Advanced Technical Ceramics worked example

Ceramic Inspection Bottleneck Risk with customer or release impact of 4 1-10: a worked example

Suppose customer or release impact falls to 4 1-10. This page works the full calculation at that level so you can see exactly which result moves and by how much. Score inspection bottleneck risk using customer impact, inspection queue pressure, and difficulty detecting defects early.

The inputs for this scenario

  • Customer or release impact: 4 1-10 (the input this scenario stresses; the baseline uses 8)
  • Inspection queue pressure: 7 1-10 (held at the documented default)
  • Defect detection difficulty: 6 1-10 (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Inspection bottleneck risk score = severity score × likelihood score × detection difficulty score.
  • Inspection bottleneck risk score works out to 5.55 score at these inputs, and this is the headline figure for the scenario.
  • Customer or release impact works out to 4 1-10 at these inputs.
  • Inspection queue pressure works out to 7 1-10 at these inputs.
  • Defect detection difficulty works out to 6 1-10 at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where customer or release impact sits at 8 1-10 and the headline result is 7.15 score, this scenario comes in 22.38% below the baseline at 5.55 score.
  • It multiplies impact, queue pressure, and detection difficulty into a single normalized inspection bottleneck risk score for prioritizing review. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Inspection bottleneck risk score: 5.55 score (headline result)
  • Customer or release impact: 4 1-10
  • Inspection queue pressure: 7 1-10
  • Defect detection difficulty: 6 1-10

Run it with your numbers

  • To rerun this with your own numbers, open the live Ceramic Inspection Bottleneck Risk calculator, set customer or release impact to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.