Aerospace & Defense Manufacturing worked example

Aerospace Documentation Burden at 29% review and correction time allowance: a worked example

This worked example runs the aerospace documentation burden numbers for a tougher week than the baseline: 29% review and correction time allowance instead of the typical 40%. Estimate documentation hours for aerospace lots from required records, processing pace, and review allowance.

The inputs for this scenario

  • Required aerospace traceability records: 210 records (held at the documented default)
  • Documentation processing pace per inspector: 3.5 records/min (held at the documented default)
  • Review and correction time allowance: 29 % (the input this scenario stresses; the baseline uses 40)

Working through the calculation

  • The calculation starts from the formula this tool documents: Base documentation processing time = required aerospace records รท processing pace.
  • Total aerospace documentation burden works out to 77.4 documentation hr at these inputs, and this is the headline figure for the scenario.
  • Base documentation processing time works out to 60 documentation hr at these inputs.
  • Review and correction allowance works out to 29 % at these inputs.
  • Documentation processing pace works out to 3.5 records/min at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where review and correction time allowance sits at 40% and the headline result is 84 documentation hr, this scenario comes in 7.86% below the baseline at 77.4 documentation hr.
  • Use it when staffing a quality records team, quoting documentation-heavy contracts, or sizing a DPD/AS9102 package effort. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Total aerospace documentation burden: 77.4 documentation hr (headline result)
  • Base documentation processing time: 60 documentation hr
  • Review and correction allowance: 29 %
  • Documentation processing pace: 3.5 records/min

Run it with your numbers

  • To rerun this with your own numbers, open the live Aerospace Documentation Burden calculator, set review and correction time allowance to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.