Aerospace & Defense Manufacturing worked example

DFARS Compliance Coverage at 72% required dfars coverage threshold: a worked example

This worked example runs the dfars compliance coverage numbers for a tougher week than the baseline: 72% required dfars coverage threshold instead of the typical 100%. Calculate DFARS-compliant material coverage from compliant line items, total controlled material line items, and the compliance target.

The inputs for this scenario

  • DFARS-compliant material line items: 58 line items (held at the documented default)
  • Controlled material line items requiring DFARS sourcing: 62 line items (held at the documented default)
  • Required DFARS coverage threshold: 72 % (the input this scenario stresses; the baseline uses 100)

Working through the calculation

  • The calculation starts from the formula this tool documents: DFARS compliance coverage = compliant line items ÷ controlled material line items × 100.
  • DFARS compliance coverage works out to 93.55 % DFARS coverage at these inputs, and this is the headline figure for the scenario.
  • Compliance gap to requirement works out to -21.55 percentage points at these inputs.
  • DFARS-compliant line items works out to 58 line items at these inputs.
  • Controlled material line items works out to 62 line items at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where required dfars coverage threshold sits at 100% and the headline result is 93.55 % DFARS coverage, this scenario lands almost exactly on the baseline at 93.55 % DFARS coverage.
  • Use it during incoming material review, supplier flow-down audits, and pre-delivery compliance checks on defense contracts. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • DFARS compliance coverage: 93.55 % DFARS coverage (headline result)
  • Compliance gap to requirement: -21.55 percentage points
  • DFARS-compliant line items: 58 line items
  • Controlled material line items: 62 line items

Run it with your numbers

  • To rerun this with your own numbers, open the live DFARS Compliance Coverage calculator, set required dfars coverage threshold to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.