Agricultural Equipment & Farm Machinery Manufacturing worked example

Seasonal Demand Capacity at 62% production uptime: a worked example

This worked example runs the seasonal demand capacity numbers for a tougher week than the baseline: 62% production uptime instead of the typical 86%. Estimate usable production capacity for seasonal farm machinery demand from machines per cycle, build cycles, uptime, and production yield.

The inputs for this scenario

  • Machines built per production cycle: 22 machines/cycle (held at the documented default)
  • Available seasonal build cycles: 42 cycles (held at the documented default)
  • Production uptime: 62 % (the input this scenario stresses; the baseline uses 86)
  • First-pass production yield: 93 % (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Gross seasonal capacity = machines built per cycle × available seasonal build cycles.
  • Usable seasonal production capacity works out to 533 machines at these inputs, and this is the headline figure for the scenario.
  • Gross seasonal production capacity works out to 924 machines at these inputs.
  • Capacity lost to downtime works out to 351 machines at these inputs.
  • Capacity lost to yield loss works out to 40.1 machines at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where production uptime sits at 86% and the headline result is 739 machines, this scenario comes in 27.91% below the baseline at 533 machines.
  • Use it during seasonal planning to set buildable volume and commit delivery slots to the dealer network. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Usable seasonal production capacity: 533 machines (headline result)
  • Gross seasonal production capacity: 924 machines
  • Capacity lost to downtime: 351 machines
  • Capacity lost to yield loss: 40.1 machines

Run it with your numbers

  • To rerun this with your own numbers, open the live Seasonal Demand Capacity calculator, set production uptime to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.