AMR, AGV & Intralogistics Automation worked example

AMR Traffic Risk Score Calculator with collision impact severity of 4 score: a worked example

This worked example runs the amr traffic risk score calculator numbers for a tougher week than the baseline: collision impact severity of 4 score instead of the typical 8 score. Score AMR traffic risk from safety or throughput impact, event frequency, and detection/control weakness.

The inputs for this scenario

  • Collision impact severity: 4 score (the input this scenario stresses; the baseline uses 8)
  • Traffic conflict frequency: 5 score (held at the documented default)
  • Detection and stop-control weakness: 4 score (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: AMR traffic risk score = traffic impact severity × traffic event frequency × detection or control weakness score.
  • AMR traffic risk score works out to 4.35 score at these inputs, and this is the headline figure for the scenario.
  • Traffic impact severity works out to 4 score at these inputs.
  • Traffic event frequency works out to 5 score at these inputs.
  • Detection or control weakness score works out to 4 score at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where collision impact severity sits at 8 score and the headline result is 5.95 score, this scenario comes in 26.89% below the baseline at 4.35 score.
  • Use it during route safety reviews, after near-miss reports, or when prioritizing where to spend a limited intersection-control or sensor budget. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • AMR traffic risk score: 4.35 score (headline result)
  • Traffic impact severity: 4 score
  • Traffic event frequency: 5 score
  • Detection or control weakness score: 4 score

Run it with your numbers

  • To rerun this with your own numbers, open the live AMR Traffic Risk Score Calculator calculator, set collision impact severity to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.