AMR, AGV & Intralogistics Automation worked example

Material Delivery SLA Capacity Calculator with required material delivery rate of 21 deliveries/hr: a worked example

This worked example runs the material delivery sla capacity calculator numbers for a tougher week than the baseline: required material delivery rate of 21 deliveries/hr instead of the typical 42 deliveries/hr. Estimate SLA delivery demand and cost from required delivery rate, operating window, and cost per late or expedited delivery.

The inputs for this scenario

  • Required material delivery rate: 21 deliveries/hr (the input this scenario stresses; the baseline uses 42)
  • SLA delivery window length: 10 hr (held at the documented default)
  • Cost per late or expedited delivery: 18 $ / delivery (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Required deliveries in SLA window = required material delivery rate × SLA operating window.
  • Required deliveries in SLA window works out to 210 deliveries at these inputs, and this is the headline figure for the scenario.
  • SLA delivery cost exposure works out to 3,780 $ at these inputs.
  • SLA operating window works out to 10 hr at these inputs.
  • Cost per late or expedited delivery works out to 18 $ / delivery at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where required material delivery rate sits at 42 deliveries/hr and the headline result is 420 deliveries, this scenario comes in 50% below the baseline at 210 deliveries.
  • Use it when committing to a line-feed SLA, sizing fleet capacity against a delivery rate, or quantifying the financial risk of a delivery shortfall. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Required deliveries in SLA window: 210 deliveries (headline result)
  • SLA delivery cost exposure: 3,780 $
  • SLA operating window: 10 hr
  • Cost per late or expedited delivery: 18 $ / delivery

Run it with your numbers

  • To rerun this with your own numbers, open the live Material Delivery SLA Capacity Calculator calculator, set required material delivery rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.