EV & Battery Manufacturing worked example

Slurry Mix Batch Yield at 69% target slurry batch yield: a worked example

This worked example runs the slurry mix batch yield numbers for a tougher week than the baseline: 69% target slurry batch yield instead of the typical 96%. Calculate usable slurry batch yield from released slurry mass, total mixed mass, and the target release yield.

The inputs for this scenario

  • Released slurry mass: 2,380 kg (held at the documented default)
  • Total mixed slurry mass: 2,500 kg (held at the documented default)
  • Target slurry batch yield: 69 % (the input this scenario stresses; the baseline uses 96)

Working through the calculation

  • The calculation starts from the formula this tool documents: Slurry batch yield = released slurry mass รท total mixed slurry mass.
  • Slurry batch yield works out to 95.2 % slurry yield at these inputs, and this is the headline figure for the scenario.
  • Slurry yield gap to target works out to -26.2 points at these inputs.
  • Released slurry mass works out to 2,380 kg at these inputs.
  • Total mixed slurry mass works out to 2,500 kg at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target slurry batch yield sits at 96% and the headline result is 95.2 % slurry yield, this scenario lands almost exactly on the baseline at 95.2 % slurry yield.
  • Use it per mix batch at the slurry release gate, or roll it up shift-by-shift to spot mixers or recipes that are losing more material than the line can afford. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Slurry batch yield: 95.2 % slurry yield (headline result)
  • Slurry yield gap to target: -26.2 points
  • Released slurry mass: 2,380 kg
  • Total mixed slurry mass: 2,500 kg

Run it with your numbers

  • To rerun this with your own numbers, open the live Slurry Mix Batch Yield calculator, set target slurry batch yield to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.