Bulk Solids, Mining, Aggregates & Material Processing worked example

Material Transfer Cost at 72% cost allocation share to this job: a worked example

This worked example runs the material transfer cost numbers for a tougher week than the baseline: 72% cost allocation share to this job instead of the typical 100%. Estimate material transfer cost for material transfer cost for bulk solids, mining, aggregates, and material processing using plant-floor material, production, quality, capacity, or cost inputs.

The inputs for this scenario

  • Material moved: 1,200 tons (held at the documented default)
  • Handling cost per ton: 2.75 $ / ton (held at the documented default)
  • Cost allocation share to this job: 72 % (the input this scenario stresses; the baseline uses 100)
  • Fixed setup and handling charge: 650 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Allocated material transfer cost = material transfer cost material quantity × material transfer cost cost per ton × allocation share.
  • Material Transfer Cost works out to 3,026 $ at these inputs, and this is the headline figure for the scenario.
  • Material Transfer Cost cost per ton works out to 2.52 $ / piece at these inputs.
  • Allocated material transfer cost works out to 2,376 $ at these inputs.
  • Fixed material transfer cost setup or handling cost works out to 650 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where cost allocation share to this job sits at 100% and the headline result is 3,950 $, this scenario comes in 23.39% below the baseline at 3,026 $.
  • Use it to cost a material move, quote a handling job, or allocate shared conveying and loading costs across multiple jobs. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Material Transfer Cost: 3,026 $ (headline result)
  • Material Transfer Cost cost per ton: 2.52 $ / piece
  • Allocated material transfer cost: 2,376 $
  • Fixed material transfer cost setup or handling cost: 650 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Material Transfer Cost calculator, set cost allocation share to this job to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.