Cannabis, Hemp & Controlled Agriculture Processing worked example

Cultivation Room Utilization at 68% target canopy utilization: a worked example

This worked example runs the cultivation room utilization numbers for a tougher week than the baseline: 68% target canopy utilization instead of the typical 95%. Calculate how much licensed or available canopy area is actively occupied so cultivation managers can plan turns, plant counts, bench use, and room scheduling.

The inputs for this scenario

  • Active canopy area in use: 8 sq ft (held at the documented default)
  • Available licensed canopy area: 250 sq ft (held at the documented default)
  • Target canopy utilization: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Cultivation room utilization = active canopy area in use ÷ available licensed canopy area × 100.
  • Cultivation room utilization works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Canopy utilization gap to target works out to 64.8 points at these inputs.
  • Active canopy area in use works out to 8 count at these inputs.
  • Available licensed canopy area works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target canopy utilization sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • Use it when auditing room turnover, planning to fill fallow canopy, or reporting facility efficiency against license capacity. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Cultivation room utilization: 3.2 % (headline result)
  • Canopy utilization gap to target: 64.8 points
  • Active canopy area in use: 8 count
  • Available licensed canopy area: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Cultivation Room Utilization calculator, set target canopy utilization to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.