Cannabis, Hemp & Controlled Agriculture Processing worked example

Drying Room Capacity at 99% expected drying room uptime: a worked example

This scenario runs the drying room capacity calculation on the strong side: 99% expected drying room uptime, with every other input held at its documented default. Use it when drying room capacity in cannabis, hemp and controlled agriculture processing is being asked to take on more work and you need to know if there is room.

The inputs for this scenario

  • Wet biomass loaded per drying cycle: 4 lb / cycle (unchanged)
  • Drying cycles available in the period: 480 cycles (unchanged)
  • Expected drying room uptime: 99 % (raised for this scenario; the documented default is 90)
  • Accepted dried-lot yield (pass rate): 97 % (unchanged)

Working through the calculation

  • Applying the documented formula (Gross wet biomass capacity = wet biomass per drying cycle × available drying cycles) to the inputs above produces each figure below.
  • At this operating point the engine returns 1,844 lb for usable drying room capacity, the number this scenario is built around.
  • At this operating point the engine returns 1,920 lb for gross wet biomass capacity.
  • At this operating point the engine returns 19.2 lb for capacity lost to room downtime.
  • At this operating point the engine returns 57.02 lb for capacity lost to drying or quality loss.

How this compares with the baseline

  • Against the tool's baseline example, where expected drying room uptime sits at 90% and the headline result is 1,676 lb, this scenario comes in 10% above the baseline at 1,844 lb.
  • Use it when sizing a new drying or curing room, scheduling a harvest against existing drying capacity, or deciding whether a big incoming crop can be processed without overflow. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Usable drying room capacity: 1,844 lb (headline result)
  • Gross wet biomass capacity: 1,920 lb
  • Capacity lost to room downtime: 19.2 lb
  • Capacity lost to drying or quality loss: 57.02 lb

Run it with your numbers

  • Every input above is editable in the live Drying Room Capacity calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.