Carbon Capture & CO₂ Compression Equipment calculator
CO₂ Compressor Power Calculator
Estimate CO₂ compressor electricity cost and specific cost per tonne for a planned compression run or operating period. Multiply load, runtime, and your tariff to see the dollar cost behind the run.
What this calculator does
- Estimate CO₂ compressor electricity cost and specific cost per tonne for a planned compression run or operating period.
- Use it when co₂ compressor power in carbon capture and co₂ compression equipment is up for an upgrade and you want a defensible savings story.
- Turns co₂ compressor power draw, compression runtime, electricity price into a energy cost for co₂ compressor power in carbon capture and co₂ compression equipment.
Formula used
- CO₂ compression electricity cost = CO₂ compressor power draw × compression runtime × electricity price
- Compression electricity cost per tonne CO₂ = CO₂ compression electricity cost ÷ CO₂ compressed
Inputs explained
- CO₂ compressor power draw: Use measured compressor demand, vendor power at the inlet and discharge pressure, or expected average motor load.
- Compression runtime: Enter operating hours at the stated load for the batch, day, month, or design case.
- Electricity price: Use the site energy rate including demand or tariff adders if they are charged to compression.
- CO₂ compressed: Use tonnes of dry CO₂ delivered to pipeline, storage, utilization, or intermediate holding during the runtime.
How to use the result
- Use it when co₂ compressor power in carbon capture and co₂ compression equipment drives meaningful kWh and the quote needs to reflect it.
- Demand charges, power factor penalties, and time-of-use windows are not modeled; treat the result as a baseline.
Common questions
- Why use this co₂ compressor power tool for carbon capture and co₂ compression equipment? Estimate CO₂ compressor electricity cost and specific cost per tonne for a planned compression run or operating period. You get a energy cost you can defend before quoting, scheduling, or sign-off.
- Which assumptions drive the energy cost? co₂ compressor power draw, compression runtime, electricity price usually move the energy cost most. Pull from measured carbon capture and co₂ compression equipment runs, supplier data, and recent quotes rather than memory.
- How should I use the result? Roll the result into the carbon capture and co₂ compression equipment quote so margin holds when energy moves.
- What can throw the result off? Validate the connected load against the nameplate and the actual duty cycle. Idle and standby loads add up.
Last reviewed 2026-05-12.