Carbon Capture & CO₂ Compression Equipment calculator

Sorbent Consumption Calculator

Estimate sorbent replacement or makeup cost for a carbon capture bed, cartridge, contactor, or DAC module over a planned operating period. Use rate times runtime times unit cost gives you the consumable cost without a spreadsheet.

What this calculator does

  • Estimate sorbent replacement or makeup cost for a carbon capture bed, cartridge, contactor, or DAC module over a planned operating period.
  • Use it when sorbent consumption in carbon capture and co₂ compression equipment is being quoted and consumables are a real chunk of the cost stack.
  • Turns sorbent makeup rate, capture system runtime, sorbent cost into a run cost for sorbent consumption in carbon capture and co₂ compression equipment.

Formula used

  • Sorbent consumed = sorbent makeup rate × capture system runtime
  • Sorbent replacement cost = sorbent consumed × sorbent cost

Inputs explained

  • Sorbent makeup rate: Use measured or vendor-estimated sorbent replacement, attrition, or cartridge consumption during capture operation.
  • Capture system runtime: Enter operating hours for the campaign, month, service interval, or project scenario.
  • Sorbent cost: Use current delivered sorbent cost, cartridge cost converted to a mass basis, or standard replacement cost.

How to use the result

  • Use it when sorbent consumption in carbon capture and co₂ compression equipment runs through meaningful consumables.
  • Storage, handling, and disposal are not modeled.

Common questions

  • How does this sorbent consumption calculator help my carbon capture and co₂ compression equipment team? Estimate sorbent replacement or makeup cost for a carbon capture bed, cartridge, contactor, or DAC module over a planned operating period. You get a run cost you can defend before quoting, scheduling, or sign-off.
  • Where do I get the inputs for this carbon capture and co₂ compression equipment calculator? sorbent makeup rate, capture system runtime, sorbent cost usually move the run cost most. Pull from measured carbon capture and co₂ compression equipment runs, supplier data, and recent quotes rather than memory.
  • How should I act on the output? Roll the run cost into the carbon capture and co₂ compression equipment quote so consumables stop eroding margin.
  • What should I double-check before acting? Confirm the unit cost includes freight and waste; both are commonly missed.

Last reviewed 2026-05-12.