Cathode Active Material & Precursor Manufacturing worked example

Compliance Reporting with reporting failure severity of 3 score: a worked example

This worked example runs the compliance reporting numbers for a tougher week than the baseline: reporting failure severity of 3 score instead of the typical 6 score. Score compliance reporting risk for CAM or precursor production records, emissions, wastewater, hazardous materials, battery passport data, or customer traceability requirements.

The inputs for this scenario

  • Reporting failure severity: 3 score (the input this scenario stresses; the baseline uses 6)
  • Likelihood of reporting failure: 4 score (held at the documented default)
  • Likelihood failure escapes detection: 3 score (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Compliance reporting risk score = reporting impact severity score × reporting occurrence score × reporting detection score.
  • Compliance reporting risk score works out to 3.35 score at these inputs, and this is the headline figure for the scenario.
  • Reporting impact severity score works out to 3 score at these inputs.
  • Reporting occurrence score works out to 4 score at these inputs.
  • Reporting detection score works out to 3 score at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where reporting failure severity sits at 6 score and the headline result is 4.55 score, this scenario comes in 26.37% below the baseline at 3.35 score.
  • Use it when triaging your portfolio of CAM, precursor, environmental and customer reporting risks so audit and remediation effort goes to the worst ones first. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Compliance reporting risk score: 3.35 score (headline result)
  • Reporting impact severity score: 3 score
  • Reporting occurrence score: 4 score
  • Reporting detection score: 3 score

Run it with your numbers

  • To rerun this with your own numbers, open the live Compliance Reporting calculator, set reporting failure severity to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.