Cold Chain & Temperature-Controlled Operations worked example

Temperature Logger Cost at 72% monitoring coverage share: a worked example

This worked example runs the temperature logger cost numbers for a tougher week than the baseline: 72% monitoring coverage share instead of the typical 100%. Estimate data logger and temperature monitoring device cost for shipments, lanes, studies, or storage locations.

The inputs for this scenario

  • Shipments, pallets, or locations monitored: 520 logger points (held at the documented default)
  • Logger cost per monitored point: 14.75 $ / logger point (held at the documented default)
  • Monitoring coverage share: 72 % (the input this scenario stresses; the baseline uses 100)
  • Calibration, software, and data-retrieval adders: 850 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Variable temperature logger cost = shipments, pallets, or locations monitored × logger cost per monitored point × monitoring coverage share.
  • total temperature logger cost works out to 6,372 $ at these inputs, and this is the headline figure for the scenario.
  • temperature logger cost per shipment unit works out to 12.25 $ / piece at these inputs.
  • variable temperature logger cost works out to 5,522 $ at these inputs.
  • calibration, software, and retrieval adders works out to 850 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where monitoring coverage share sits at 100% and the headline result is 8,520 $, this scenario comes in 25.21% below the baseline at 6,372 $.
  • Use it when pricing a cold chain monitoring program, comparing single-use versus reusable loggers, or building the monitoring line of a 3PL quote. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • total temperature logger cost: 6,372 $ (headline result)
  • temperature logger cost per shipment unit: 12.25 $ / piece
  • variable temperature logger cost: 5,522 $
  • calibration, software, and retrieval adders: 850 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Temperature Logger Cost calculator, set monitoring coverage share to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.