Commercial Kitchen Equipment worked example

Stainless Fabrication Cost at 110% quoted fabrication scope share: a worked example

What does the result look like when quoted fabrication scope share reaches 110%? The full calculation is worked below with real intermediate numbers. estimating stainless steel fabrication cost for a kitchen equipment quote or production order

The inputs for this scenario

  • fabricated stainless equipment units: 18 units (unchanged)
  • stainless fabrication cost per equipment unit: 740 $ / unit (unchanged)
  • quoted fabrication scope share: 110 % (raised for this scenario; the documented default is 100)
  • fixture, setup, polishing, and freight-ready prep charges: 1,250 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Variable stainless fabrication cost = fabricated stainless equipment units × stainless fabrication cost per equipment unit × quoted fabrication scope share) to the inputs above produces each figure below.
  • At this operating point the engine returns 15,902 $ for total stainless fabrication cost, the number this scenario is built around.
  • At this operating point the engine returns 883 $ / piece for stainless fabrication cost per equipment unit.
  • At this operating point the engine returns 14,652 $ for variable stainless fabrication cost.
  • At this operating point the engine returns 1,250 $ for fixture, setup, polishing, and freight-ready prep charges.

How this compares with the baseline

  • Against the tool's baseline example, where quoted fabrication scope share sits at 100% and the headline result is 14,570 $, this scenario comes in 9.14% above the baseline at 15,902 $.
  • A figure at this level is achievable when quoted fabrication scope share is genuinely sustained, not just peaked for a shift. It uses one blended per-unit cost, so a mixed run of simple shelves and complex welded hoods will be averaged unless you run those groups separately.

Results at a glance

  • total stainless fabrication cost: 15,902 $ (headline result)
  • stainless fabrication cost per equipment unit: 883 $ / piece
  • variable stainless fabrication cost: 14,652 $
  • fixture, setup, polishing, and freight-ready prep charges: 1,250 $

Run it with your numbers

  • Every input above is editable in the live Stainless Fabrication Cost calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.