Construction Products, Windows, Doors & Fenestration worked example

Coated Glass Cost at 72% coated glass scope included: a worked example

This worked example runs the coated glass cost numbers for a tougher week than the baseline: 72% coated glass scope included instead of the typical 100%. Estimate coated glass cost from coated lite area, cost per square foot, scope, and fixed adders.

The inputs for this scenario

  • Coated glass area: 2,860 sq ft (held at the documented default)
  • Coated glass cost per square foot: 4.65 $ / sq ft (held at the documented default)
  • Coated glass scope included: 72 % (the input this scenario stresses; the baseline uses 100)
  • Fixed coating setup, freight, and handling adder: 1,550 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Variable coated glass cost = coated glass area × coated glass cost per square foot × coated glass scope included.
  • total coated glass cost works out to 11,125 $ at these inputs, and this is the headline figure for the scenario.
  • coated glass cost per square foot works out to 3.89 $ / piece at these inputs.
  • variable coated glass cost works out to 9,575 $ at these inputs.
  • fixed coating setup, freight, and handling adder works out to 1,550 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where coated glass scope included sits at 100% and the headline result is 14,849 $, this scenario comes in 25.08% below the baseline at 11,125 $.
  • Use it when costing or quoting coated low-e glass for an IGU or glazing order, or when comparing coating options on a per-square-foot basis. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • total coated glass cost: 11,125 $ (headline result)
  • coated glass cost per square foot: 3.89 $ / piece
  • variable coated glass cost: 9,575 $
  • fixed coating setup, freight, and handling adder: 1,550 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Coated Glass Cost calculator, set coated glass scope included to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.