Composites, Fiberglass & Advanced Materials calculator
Cure Cycle Capacity Calculator
Use this calculator to plan cure cycle loading time for composite parts including ramp, dwell, pressure/vacuum hold, cool-down, unload, and quality recording allowance.
What this calculator does
- Estimate total cure time required for oven, autoclave, or press cure cycles.
- checking whether cure assets can support planned composite output
- The result estimates hours needed to clear the planned cure workload.
Formula used
- Base cure cycle capacity = parts or cure batches required ÷ cure batch completion pace
- Estimated cure cycle capacity = base time × (1 + cure queue and documentation allowance)
Inputs explained
- parts or cure batches required: Use the number of cure loads, molds, panels, or part batches scheduled through the cure asset.
- cure batch completion pace: Use actual batch completion rate including ramp, dwell, cool-down, load, and unload.
- cure queue and documentation allowance: Include fixture loading, thermocouple checks, recorder review, vacuum checks, and queue movement.
How to use the result
- Use it to schedule ovens, autoclaves, heated tools, or compression molding presses before committing due dates.
- Treat the result as a planning estimate until it is checked against the approved laminate schedule, material datasheets, ply books, resin batch records, tool condition, cure logs, inspection results, customer specification, and actual shop observations for the same part family and process.
Common questions
- What is the cure cycle capacity calculator for? Use this calculator to plan cure cycle loading time for composite parts including ramp, dwell, pressure/vacuum hold, cool-down, unload, and quality recording allowance.
- What information should I enter? Enter parts or cure batches required, cure batch completion pace, and a realistic allowance for setup, staging, bagging, inspection, operator movement, and process delays.
- What does the result tell me? The result estimates hours needed to clear the planned cure workload.
- When is the result only an estimate? Treat the result as a planning estimate until it is checked against the approved laminate schedule, material datasheets, ply books, resin batch records, tool condition, cure logs, inspection results, customer specification, and actual shop observations for the same part family and process.
Last reviewed 2026-05-12.