Electronics Manufacturing worked example

PCB Cost Per Board with total bare pcb cost of 930 $: a worked example

This worked example runs the pcb cost per board numbers for a tougher week than the baseline: total bare pcb cost of 930 $ instead of the typical 1,850 $. Convert bare PCB panel or lot cost into a cost per sellable board.

The inputs for this scenario

  • Total bare PCB cost: 930 $ (the input this scenario stresses; the baseline uses 1,850)
  • Usable boards represented: 720 boards (held at the documented default)
  • Currency or allocation factor: 1 x (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Unadjusted PCB cost per board = total bare PCB cost รท usable boards represented.
  • PCB cost per board works out to 1.29 $ / board at these inputs, and this is the headline figure for the scenario.
  • Unadjusted PCB cost per board works out to 1.29 $ / board at these inputs.
  • Currency or allocation factor works out to 1 x at these inputs.
  • Usable boards represented works out to 720 boards at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where total bare pcb cost sits at 1,850 $ and the headline result is 2.57 $ / board, this scenario comes in 49.73% below the baseline at 1.29 $ / board.
  • Use it when normalizing fabricator quotes, building a BOM cost line, or converting a foreign-currency panel invoice to a per-board figure. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • PCB cost per board: 1.29 $ / board (headline result)
  • Unadjusted PCB cost per board: 1.29 $ / board
  • Currency or allocation factor: 1 x
  • Usable boards represented: 720 boards

Run it with your numbers

  • To rerun this with your own numbers, open the live PCB Cost Per Board calculator, set total bare pcb cost to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.