Elevators, Escalators & Vertical Transport Equipment worked example

Elevator Cab Assembly Takt with net available cab assembly time per shift of 1,100 min / shift: a worked example

This scenario runs the elevator cab assembly takt calculation on the strong side: net available cab assembly time per shift of 1,100 min / shift, with every other input held at its documented default. Use it to set line pace, staffing, and station balance for Elevators, Escalators & Vertical Transport Equipment whenever demand or available time changes.

The inputs for this scenario

  • Net available cab assembly time per shift: 1,100 min / shift (raised for this scenario; the documented default is 450)
  • Elevator cabs demanded per shift: 60 units / shift (unchanged)
  • Cab assembly shifts per day: 2 shifts (unchanged)

Working through the calculation

  • Applying the documented formula (Takt time = net available production time × 60 ÷ customer demand) to the inputs above produces each figure below.
  • At this operating point the engine returns 1,100 sec / unit for takt time, the number this scenario is built around.
  • At this operating point the engine returns 3.27 units / hr for required rate.
  • At this operating point the engine returns 2,200 min for available time / day.
  • At this operating point the engine returns 120 units for demand / day.

How this compares with the baseline

  • Against the tool's baseline example, where net available cab assembly time per shift sits at 450 min / shift and the headline result is 450 sec / unit, this scenario comes in 144% above the baseline at 1,100 sec / unit.
  • Use it when laying out or rebalancing a cab assembly line, sizing crews, or checking whether a new contract's demand fits within existing shift capacity. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Takt time: 1,100 sec / unit (headline result)
  • Required rate: 3.27 units / hr
  • Available time / day: 2,200 min
  • Demand / day: 120 units

Run it with your numbers

  • Every input above is editable in the live Elevator Cab Assembly Takt calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.