Elevators, Escalators & Vertical Transport Equipment worked example

Controller Panel Wiring Labor at 110% panel wiring scope captured: a worked example

What does the result look like when panel wiring scope captured reaches 110%? The full calculation is worked below with real intermediate numbers. a production planner or estimator needs panel wiring labor cost for a controller or fixture package

The inputs for this scenario

  • Controller panel wiring hours: 68 wiring hr (unchanged)
  • Loaded wiring labor rate: 72 $ / wiring hr (unchanged)
  • Panel wiring scope captured: 110 % (raised for this scenario; the documented default is 100)
  • Panel setup, test, and documentation cost: 650 $ (unchanged)

Working through the calculation

  • Applying the documented formula (Variable panel wiring labor cost = controller panel wiring hours × loaded wiring labor rate × panel wiring scope captured) to the inputs above produces each figure below.
  • At this operating point the engine returns 6,036 $ for total panel wiring labor cost, the number this scenario is built around.
  • At this operating point the engine returns 88.76 $ / wiring hr for panel wiring cost per hour.
  • At this operating point the engine returns 5,386 $ for variable panel wiring labor cost.
  • At this operating point the engine returns 650 $ for panel setup and documentation cost.

How this compares with the baseline

  • Against the tool's baseline example, where panel wiring scope captured sits at 100% and the headline result is 5,546 $, this scenario comes in 8.83% above the baseline at 6,036 $.
  • A figure at this level is achievable when panel wiring scope captured is genuinely sustained, not just peaked for a shift. It assumes a single loaded labor rate and a flat hours estimate; complex relay logic, point-to-point versus harnessed wiring, and rework on first articles can swing actual hours well beyond a flat estimate.

Results at a glance

  • Total panel wiring labor cost: 6,036 $ (headline result)
  • Panel wiring cost per hour: 88.76 $ / wiring hr
  • Variable panel wiring labor cost: 5,386 $
  • Panel setup and documentation cost: 650 $

Run it with your numbers

  • Every input above is editable in the live Controller Panel Wiring Labor calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.