Fastening, Torque & Joint Assembly worked example

Torque Traceability Coverage at 110% target traceability coverage: a worked example

What does the result look like when target traceability coverage reaches 110%? The full calculation is worked below with real intermediate numbers. Use it when checking DC tool data capture, serial-number linkage, torque-angle records, batch traceability, or customer-required fastening evidence.

The inputs for this scenario

  • Complete torque records captured: 985 records (unchanged)
  • Required traceable joint records: 1,000 records (unchanged)
  • Target traceability coverage: 110 % (raised for this scenario; the documented default is 99)

Working through the calculation

  • Applying the documented formula (Torque traceability coverage = complete records captured ÷ required traceable records) to the inputs above produces each figure below.
  • At this operating point the engine returns 98.5 % for torque traceability coverage, the number this scenario is built around.
  • At this operating point the engine returns 11.5 points for gap to traceability target.
  • At this operating point the engine returns 985 records for complete torque records.
  • At this operating point the engine returns 1,000 records for required traceable records.

How this compares with the baseline

  • Against the tool's baseline example, where target traceability coverage sits at 99% and the headline result is 98.5 %, this scenario lands almost exactly on the baseline at 98.5 %.
  • A figure at this level is achievable when target traceability coverage is genuinely sustained, not just peaked for a shift. Coverage confirms a record exists, not that the recorded torque value was correct or in tolerance — a complete record can still document an out-of-spec joint.

Results at a glance

  • Torque traceability coverage: 98.5 % (headline result)
  • Gap to traceability target: 11.5 points
  • Complete torque records: 985 records
  • Required traceable records: 1,000 records

Run it with your numbers

  • Every input above is editable in the live Torque Traceability Coverage calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.