Fire Suppression, Sprinkler & Safety System Products worked example

Throughput Gap with available throughput capacity of 260 units / time: a worked example in fire suppression, sprinkler & safety system products

Suppose available throughput capacity falls to 260 units / time. This page works the full calculation at that level so you can see exactly which result moves and by how much. Calculate the throughput gap between available fire protection production or installation capacity and required demand.

The inputs for this scenario

  • Available throughput capacity: 260 units / time (the input this scenario stresses; the baseline uses 520)
  • Required throughput demand: 470 units / time (held at the documented default)
  • Reference throughput requirement: 470 units / time (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Throughput Gap = available throughput capacity - required throughput demand.
  • Throughput Gap works out to -44.68 % at these inputs, and this is the headline figure for the scenario.
  • Throughput Gap amount works out to -210 units / time at these inputs.
  • Available throughput capacity works out to 260 units / time at these inputs.
  • Required throughput demand works out to 470 units / time at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where available throughput capacity sits at 520 units / time and the headline result is 10.64 %, this scenario comes in 520% below the baseline at -44.68 %.
  • It computes the difference between available throughput capacity and required demand, then expresses that gap as a percentage of the reference requirement. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Throughput Gap: -44.68 % (headline result)
  • Throughput Gap amount: -210 units / time
  • Available throughput capacity: 260 units / time
  • Required throughput demand: 470 units / time

Run it with your numbers

  • To rerun this with your own numbers, open the live Throughput Gap calculator, set available throughput capacity to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.