Flavors, Fragrances & Aroma Chemicals worked example

Inventory Coverage with average daily ingredient usage of 19 kg / day: a worked example in flavors, fragrances & aroma chemicals

Suppose average daily ingredient usage falls to 19 kg / day. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate inventory coverage for aroma chemicals, essential oils, solvents, carriers, packaging, flavor concentrates, or finished fragrance compounds.

The inputs for this scenario

  • Average daily ingredient usage: 19 kg / day (the input this scenario stresses; the baseline uses 38)
  • Supplier or internal replenishment lead time: 45 days (held at the documented default)
  • Safety stock on hand: 260 kg (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Inventory Coverage cycle stock = average daily ingredient usage × supplier or internal replenishment lead time.
  • Protected days of supply works out to 0 days at these inputs, and this is the headline figure for the scenario.
  • Unprotected days works out to 0.42 days at these inputs.
  • Inventory works out to 19 pieces at these inputs.
  • Daily usage works out to 45 pieces / day at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where average daily ingredient usage sits at 38 kg / day and the headline result is 0 days, this scenario comes in 50% below the baseline at 0 days.
  • It computes required inventory coverage as cycle stock (daily usage times lead time) plus safety stock, and expresses the position you hold in days of supply. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Protected days of supply: 0 days (headline result)
  • Unprotected days: 0.42 days
  • Inventory: 19 pieces
  • Daily usage: 45 pieces / day

Run it with your numbers

  • To rerun this with your own numbers, open the live Inventory Coverage calculator, set average daily ingredient usage to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.