Flavors, Fragrances & Aroma Chemicals worked example

Waste Disposal Cost at 72% waste stream scope included: a worked example in flavors, fragrances & aroma chemicals

Suppose waste stream scope included falls to 72%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate disposal cost for off-spec batches, solvent waste, rinse waste, contaminated packaging, spent filters, retained samples, and expired flavor or fragrance materials.

The inputs for this scenario

  • Waste quantity for disposal: 1,250 kg (held at the documented default)
  • Disposal cost per kg: 1.85 $ / kg (held at the documented default)
  • Waste stream scope included: 72 % (the input this scenario stresses; the baseline uses 100)
  • Fixed pickup, testing, or documentation cost: 650 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Variable waste disposal cost = waste quantity for disposal × disposal cost per kg × waste stream scope included.
  • Total waste disposal cost works out to 2,315 $ at these inputs, and this is the headline figure for the scenario.
  • Disposal cost per kg allocated works out to 1.85 $ / piece at these inputs.
  • Variable waste disposal cost works out to 1,665 $ at these inputs.
  • Fixed pickup, testing, or documentation cost works out to 650 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where waste stream scope included sits at 100% and the headline result is 2,963 $, this scenario comes in 21.86% below the baseline at 2,315 $.
  • It computes total waste disposal cost as the per-kilogram variable charge across the in-scope waste quantity plus fixed pickup, testing, and documentation fees. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Total waste disposal cost: 2,315 $ (headline result)
  • Disposal cost per kg allocated: 1.85 $ / piece
  • Variable waste disposal cost: 1,665 $
  • Fixed pickup, testing, or documentation cost: 650 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Waste Disposal Cost calculator, set waste stream scope included to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.