Gaming & Entertainment Hardware worked example

Demand Ramp Planner at 56% ramp line availability: a worked example in gaming & entertainment hardware

This worked example runs the demand ramp planner numbers for a tougher week than the baseline: 56% ramp line availability instead of the typical 78%. Estimate good output capacity during a demand ramp for new gaming consoles, accessories, arcade machines, VR hardware, AV devices, or connected entertainment products.

The inputs for this scenario

  • Ramp units completed per cycle: 24 units / cycle (held at the documented default)
  • Ramp cycles available before launch: 55 cycles (held at the documented default)
  • Ramp line availability: 56 % (the input this scenario stresses; the baseline uses 78)
  • Ramp-stage first-pass yield: 90 % (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Gross demand ramp capacity = ramp units completed per cycle × available ramp cycles.
  • Good demand ramp capacity works out to 665 units at these inputs, and this is the headline figure for the scenario.
  • Gross demand ramp capacity works out to 1,320 units at these inputs.
  • Demand Ramp Planner uptime loss works out to 581 units at these inputs.
  • Demand Ramp Planner yield or rework loss works out to 73.92 units at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where ramp line availability sits at 78% and the headline result is 927 units, this scenario comes in 28.21% below the baseline at 665 units.
  • Use it during launch planning to set a realistic build commitment before steady-state efficiency is reached. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Good demand ramp capacity: 665 units (headline result)
  • Gross demand ramp capacity: 1,320 units
  • Demand Ramp Planner uptime loss: 581 units
  • Demand Ramp Planner yield or rework loss: 73.92 units

Run it with your numbers

  • To rerun this with your own numbers, open the live Demand Ramp Planner calculator, set ramp line availability to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.