Implantable Electronics & Neurodevices worked example

Compliance Review Load at 35% review correction and rework allowance: a worked example in implantable electronics & neurodevices

Push review correction and rework allowance up to 35% and the picture changes. This example computes every intermediate figure at that operating point. Use it when regulatory, quality, or design assurance teams need to plan review workload for implantable electronics documentation.

The inputs for this scenario

  • Compliance review items per lot: 75 items (unchanged)
  • Compliance reviewer throughput rate: 0.22 items / min (unchanged)
  • Review correction and rework allowance: 35 % (raised for this scenario; the documented default is 30)

Working through the calculation

  • Applying the documented formula (Base compliance review time = compliance review items รท compliance review rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 460 min for required compliance review time, the number this scenario is built around.
  • At this operating point the engine returns 341 min for base compliance review time.
  • At this operating point the engine returns 35 % for review correction allowance.
  • At this operating point the engine returns 0.22 pieces / min for compliance review rate.

How this compares with the baseline

  • Against the tool's baseline example, where review correction and rework allowance sits at 30% and the headline result is 443 min, this scenario comes in 3.85% above the baseline at 460 min.
  • It computes base review time from item count and reviewer rate, then scales it up by a correction allowance to get required review time. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Required compliance review time: 460 min (headline result)
  • Base compliance review time: 341 min
  • Review correction allowance: 35 %
  • Compliance review rate: 0.22 pieces / min

Run it with your numbers

  • Every input above is editable in the live Compliance Review Load calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.