Implantable Electronics & Neurodevices worked example

Traceability Workload at 29% traceability correction allowance: a worked example in implantable electronics & neurodevices

This scenario runs the traceability workload calculation on the strong side: 29% traceability correction allowance, with every other input held at its documented default. Use it when operations or QA needs to plan unique device, lot genealogy, component trace, and device history record review time.

The inputs for this scenario

  • Traceability records to process: 950 records (unchanged)
  • Traceability review rate: 18 records / min (unchanged)
  • Traceability correction allowance: 29 % (raised for this scenario; the documented default is 25)

Working through the calculation

  • Applying the documented formula (Base traceability workload time = traceability records to process รท traceability review rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 68.08 min for required traceability workload time, the number this scenario is built around.
  • At this operating point the engine returns 52.78 min for base traceability workload time.
  • At this operating point the engine returns 29 % for traceability correction allowance.
  • At this operating point the engine returns 18 pieces / min for traceability review rate.

How this compares with the baseline

  • Against the tool's baseline example, where traceability correction allowance sits at 25% and the headline result is 65.97 min, this scenario comes in 3.2% above the baseline at 68.08 min.
  • Use it when scheduling device history record (DHR) review or UDI/genealogy reconciliation ahead of lot release. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Required traceability workload time: 68.08 min (headline result)
  • Base traceability workload time: 52.78 min
  • Traceability correction allowance: 29 %
  • Traceability review rate: 18 pieces / min

Run it with your numbers

  • Every input above is editable in the live Traceability Workload calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.