Industrial Software Integration & APIs worked example

API Adoption Rate at 54% target adoption rate: a worked example

This worked example runs the api adoption rate numbers for a tougher week than the baseline: 54% target adoption rate instead of the typical 75%. Calculate the adoption rate of your manufacturing APIs by comparing the number of active consuming systems or users to the total target audience, with gap-to-target analysis.

The inputs for this scenario

  • Systems actively calling the API: 12 systems (held at the documented default)
  • Total systems targeted for integration: 20 systems (held at the documented default)
  • Target adoption rate: 54 % (the input this scenario stresses; the baseline uses 75)

Working through the calculation

  • The calculation starts from the formula this tool documents: API adoption rate = (active consumers / total target consumers) x 100.
  • API adoption rate works out to 60 % at these inputs, and this is the headline figure for the scenario.
  • Gap to adoption target works out to -6 points at these inputs.
  • Active API consumers works out to 12 count at these inputs.
  • Total target consumers works out to 20 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target adoption rate sits at 75% and the headline result is 60 %, this scenario lands almost exactly on the baseline at 60 %.
  • Use it during and after an API or integration platform rollout to gauge real uptake across plant and enterprise systems. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • API adoption rate: 60 % (headline result)
  • Gap to adoption target: -6 points
  • Active API consumers: 12 count
  • Total target consumers: 20 count

Run it with your numbers

  • To rerun this with your own numbers, open the live API Adoption Rate calculator, set target adoption rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.