MES, MOM & Shop-Floor Data Systems worked example
Electronic Signoff Cycle Time at 46% queue and escalation allowance: a worked example
What does the result look like when queue and escalation allowance reaches 46%? The full calculation is worked below with real intermediate numbers. Use when evaluating electronic signature workflows to estimate how long batch or lot release takes with e-signatures. Compare against paper-based signoff to quantify the time savings.
The inputs for this scenario
- Signoff steps per batch: 4 steps (unchanged)
- Signoffs completed per minute: 0.5 signoffs / min (unchanged)
- Queue and escalation allowance: 46 % (raised for this scenario; the documented default is 40)
Working through the calculation
- Applying the documented formula (Base signoff time = signoff steps / signoffs completed per minute) to the inputs above produces each figure below.
- At this operating point the engine returns 11.68 hr for total signoff cycle time, the number this scenario is built around.
- At this operating point the engine returns 8 hr for base signoff processing time.
- At this operating point the engine returns 46 % for queue and escalation allowance.
- At this operating point the engine returns 0.5 pieces / min for signoff completion rate.
How this compares with the baseline
- Against the tool's baseline example, where queue and escalation allowance sits at 40% and the headline result is 11.2 hr, this scenario comes in 4.29% above the baseline at 11.68 hr.
- A figure at this level is achievable when queue and escalation allowance is genuinely sustained, not just peaked for a shift. It treats queue and escalation as a flat percentage on active processing, so it will understate variability when approvals depend on a single overloaded reviewer or span shift and weekend gaps.
Results at a glance
- Total signoff cycle time: 11.68 hr (headline result)
- Base signoff processing time: 8 hr
- Queue and escalation allowance: 46 %
- Signoff completion rate: 0.5 pieces / min
Run it with your numbers
- Every input above is editable in the live Electronic Signoff Cycle Time calculator, which recalculates instantly and can be shared with the inputs intact.
Last reviewed 2026-05-12.