Metal Recycling, Scrap Processing & Salvage worked example

Equipment Utilization at 68% target equipment utilization rate: a worked example

Suppose target equipment utilization rate falls to 68%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate equipment utilization for metal recycling, scrap processing and salvage using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Hours equipment ran productively: 8 count (held at the documented default)
  • Total scheduled operating hours available: 250 count (held at the documented default)
  • Target equipment utilization rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Equipment utilization rate = equipment utilization count ÷ total equipment utilization population × 100.
  • Equipment utilization rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Equipment utilization gap to target works out to 64.8 points at these inputs.
  • Equipment utilization count works out to 8 count at these inputs.
  • Total equipment utilization population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target equipment utilization rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • It computes productive run hours as a percentage of total scheduled hours, then reports the point gap between that utilization and your target. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Equipment utilization rate: 3.2 % (headline result)
  • Equipment utilization gap to target: 64.8 points
  • Equipment utilization count: 8 count
  • Total equipment utilization population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Equipment Utilization calculator, set target equipment utilization rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.