Metals, Steel, Aluminum & Coil Processing worked example

Scrap Metal Value at 68% payable share: a worked example

Suppose payable share falls to 68%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate the recoverable value of scrap metal from scrap weight, the scrap price per pound, the payable share after deductions, and any container or sorting premium.

The inputs for this scenario

  • Scrap weight: 20,000 lb (held at the documented default)
  • Scrap price: 0.2 $ / lb (held at the documented default)
  • Payable share: 68 % (the input this scenario stresses; the baseline uses 95)
  • Container or sorting premium: 0 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Payable scrap value = scrap weight × scrap price × payable share.
  • Total scrap value works out to 2,720 $ at these inputs, and this is the headline figure for the scenario.
  • Value per pound works out to 0.14 $ / piece at these inputs.
  • Payable scrap value works out to 2,720 $ at these inputs.
  • Container or sorting premium works out to 0 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where payable share sits at 95% and the headline result is 3,800 $, this scenario comes in 28.42% below the baseline at 2,720 $.
  • It computes the total payable dollar value of a scrap load as weight times price times payable share, plus any container or sorting premium. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Total scrap value: 2,720 $ (headline result)
  • Value per pound: 0.14 $ / piece
  • Payable scrap value: 2,720 $
  • Container or sorting premium: 0 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Scrap Metal Value calculator, set payable share to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.