Packaging & Logistics worked example

Pallet Cube with pallet length of 120 in: a worked example

This scenario runs the pallet cube calculation on the strong side: pallet length of 120 in, with every other input held at its documented default. Use it to plan trailer and container cube, set storage rates by cube, and compare pallet builds.

The inputs for this scenario

  • Pallet length: 120 in (raised for this scenario; the documented default is 48)
  • Pallet width: 40 in (unchanged)
  • Load height: 60 in (unchanged)
  • Cubic inch to cubic foot factor: 0 x (unchanged)

Working through the calculation

  • Applying the documented formula (Pallet cube (in³) = pallet length × pallet width × load height) to the inputs above produces each figure below.
  • At this operating point the engine returns 166 ft³ for pallet cube, the number this scenario is built around.
  • At this operating point the engine returns 288,000 in³ for pallet cube before conversion.
  • At this operating point the engine returns 0 x for cubic foot conversion factor.
  • At this operating point the engine returns 4,800 in² for pallet footprint area.

How this compares with the baseline

  • Against the tool's baseline example, where pallet length sits at 48 in and the headline result is 66.59 ft³, this scenario comes in 150% above the baseline at 166 ft³.
  • Use it to size trailer cube utilization or to check dimensional weight against actual weight on LTL shipments. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Pallet cube: 166 ft³ (headline result)
  • Pallet cube before conversion: 288,000 in³
  • Cubic foot conversion factor: 0 x
  • Pallet footprint area: 4,800 in²

Run it with your numbers

  • Every input above is editable in the live Pallet Cube calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.