Packaging & Logistics worked example

Pick Pack Cost Per Order with total pick and pack cost of 11,300 $: a worked example

Push total pick and pack cost up to 11,300 $ and the picture changes. This example computes every intermediate figure at that operating point. Use it to benchmark fulfillment cost, compare 3PL quotes, and see how labor and materials load onto each order.

The inputs for this scenario

  • Total pick and pack cost: 11,300 $ (raised for this scenario; the documented default is 4,500)
  • Orders fulfilled: 1,500 orders (unchanged)
  • Cost unit conversion factor: 1 x (unchanged)

Working through the calculation

  • Applying the documented formula (Pick and pack cost per order = total pick and pack cost รท orders fulfilled) to the inputs above produces each figure below.
  • At this operating point the engine returns 7.53 $ / order for pick and pack cost per order, the number this scenario is built around.
  • At this operating point the engine returns 7.53 $ / order for cost per order before conversion.
  • At this operating point the engine returns 1 x for unit conversion factor.
  • At this operating point the engine returns 1,500 orders for orders fulfilled.

How this compares with the baseline

  • Against the tool's baseline example, where total pick and pack cost sits at 4,500 $ and the headline result is 3 $ / order, this scenario comes in 151% above the baseline at 7.53 $ / order.
  • It divides total pick-and-pack cost by orders fulfilled and applies an optional conversion factor for currency or unit adjustments. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Pick and pack cost per order: 7.53 $ / order (headline result)
  • Cost per order before conversion: 7.53 $ / order
  • Unit conversion factor: 1 x
  • Orders fulfilled: 1,500 orders

Run it with your numbers

  • Every input above is editable in the live Pick Pack Cost Per Order calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.