Pharmaceutical Packaging & Serialization worked example

Batch Release Packaging Hold at 12% setup, handling, and delay allowance: a worked example

What does the result look like when setup, handling, and delay allowance reaches 12%? The full calculation is worked below with real intermediate numbers. Use it when batch release packaging hold in pharmaceutical packaging and serialization needs a defensible run time before a quote goes out.

The inputs for this scenario

  • Units awaiting batch release hold: 120 units (unchanged)
  • Hold clearance throughput: 12 units / min (unchanged)
  • Setup, handling, and delay allowance: 12 % (raised for this scenario; the documented default is 10)

Working through the calculation

  • Applying the documented formula (Base batch release packaging hold time = batch release packaging hold workload รท batch release packaging hold completion rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 11.2 hr for required batch release packaging hold time, the number this scenario is built around.
  • At this operating point the engine returns 10 hr for base batch release packaging hold time.
  • At this operating point the engine returns 12 % for batch release packaging hold allowance applied.
  • At this operating point the engine returns 12 pieces / min for batch release packaging hold completion rate.

How this compares with the baseline

  • Against the tool's baseline example, where setup, handling, and delay allowance sits at 10% and the headline result is 11 hr, this scenario comes in 1.82% above the baseline at 11.2 hr.
  • A figure at this level is achievable when setup, handling, and delay allowance is genuinely sustained, not just peaked for a shift. It models throughput as a steady clearance rate, so it will not capture stop-and-go delays from investigations, deviations, or waiting on out-of-spec lab results.

Results at a glance

  • Required batch release packaging hold time: 11.2 hr (headline result)
  • Base batch release packaging hold time: 10 hr
  • Batch release packaging hold allowance applied: 12 %
  • Batch release packaging hold completion rate: 12 pieces / min

Run it with your numbers

  • Every input above is editable in the live Batch Release Packaging Hold calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.