Plating, Anodizing & Surface Treatment worked example

Plating Compliance Workload at 68% target compliance rate: a worked example

This worked example runs the plating compliance workload numbers for a tougher week than the baseline: 68% target compliance rate instead of the typical 95%. Estimate plating compliance workload for plating, anodizing and surface treatment using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Compliant Plating Records: 8 count (held at the documented default)
  • Total Plating Records Audited: 250 count (held at the documented default)
  • Target Compliance Rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Plating compliance workload rate = plating compliance workload count ÷ total plating compliance workload population × 100.
  • Plating compliance workload rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Plating compliance workload gap to target works out to 64.8 points at these inputs.
  • Plating compliance workload count works out to 8 count at these inputs.
  • Total plating compliance workload population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target compliance rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • Use it when preparing for a Nadcap or customer audit, tracking corrective-action progress, or sizing the compliance workload across a batch of records. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Plating compliance workload rate: 3.2 % (headline result)
  • Plating compliance workload gap to target: 64.8 points
  • Plating compliance workload count: 8 count
  • Total plating compliance workload population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Plating Compliance Workload calculator, set target compliance rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.