Powder Metallurgy & Sintered Parts worked example
Quote Margin with quoted price per part of 63 units: a worked example in powder metallurgy & sintered parts
Suppose quoted price per part falls to 63 units. This page works the full calculation at that level so you can see exactly which result moves and by how much. Quote Margin tells a powder metallurgy shop how much of each quoted price is left over after the fully loaded cost of producing a sintered part.
The inputs for this scenario
- Quoted price per part: 63 units (the input this scenario stresses; the baseline uses 125)
- Fully loaded cost per part: 100 units (held at the documented default)
- Reference base for percentage: 100 units (held at the documented default)
Working through the calculation
- The calculation starts from the formula this tool documents: Quote Margin margin = available value - required value.
- Margin works out to -37 % at these inputs, and this is the headline figure for the scenario.
- Absolute margin works out to -37 value at these inputs.
- Available amount works out to 63 value at these inputs.
- Required amount works out to 100 value at these inputs.
How this compares with the baseline
- Against the tool's baseline example, where quoted price per part sits at 125 units and the headline result is 25 %, this scenario comes in 248% below the baseline at -37 %.
- It computes gross margin as (quoted price minus loaded cost) divided by a reference base, expressed as a percent. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.
Results at a glance
- Margin: -37 % (headline result)
- Absolute margin: -37 value
- Available amount: 63 value
- Required amount: 100 value
Run it with your numbers
- To rerun this with your own numbers, open the live Quote Margin calculator, set quoted price per part to your actual value, and adjust the remaining inputs to match your operation.
Last reviewed 2026-05-12.