Product Compliance, Labeling & Certification worked example

Regulatory Change Impact at 43% skus actually in scope: a worked example

This worked example runs the regulatory change impact numbers for a tougher week than the baseline: 43% skus actually in scope instead of the typical 60%. Estimate the cost of responding to a new regulation across a product line, including per-SKU remediation and one-time legal review.

The inputs for this scenario

  • Affected SKUs to remediate: 40 SKUs (held at the documented default)
  • Remediation cost per SKU: 2,800 $/SKU (held at the documented default)
  • SKUs actually in scope: 43 % (the input this scenario stresses; the baseline uses 60)
  • Legal review and filing cost: 9,000 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Total impact = affected SKUs x remediation cost per SKU x (in-scope % / 100) + legal review and filing cost.
  • Total regulatory change impact cost works out to 57,160 $ at these inputs, and this is the headline figure for the scenario.
  • Regulatory change impact cost per unit works out to 1,429 $ / piece at these inputs.
  • Variable regulatory change impact cost works out to 48,160 $ at these inputs.
  • Fixed regulatory change impact adder works out to 9,000 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where skus actually in scope sits at 60% and the headline result is 76,200 $, this scenario comes in 24.99% below the baseline at 57,160 $.
  • Use it when a regulation is published or amended and you need to budget remediation before committing engineering, testing, or legal resources. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Total regulatory change impact cost: 57,160 $ (headline result)
  • Regulatory change impact cost per unit: 1,429 $ / piece
  • Variable regulatory change impact cost: 48,160 $
  • Fixed regulatory change impact adder: 9,000 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Regulatory Change Impact calculator, set skus actually in scope to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.