Product Compliance, Labeling & Certification worked example

UDI Labeling Workload at 7.2% scanner setup, reprint, and gudid delay allowance: a worked example

Here is what the math looks like when conditions slip. We hold every other input steady and drop scanner setup, reprint, and gudid delay allowance to 7.2%, then walk the calculation through step by step. Estimate udi labeling workload for product compliance, labeling and certification using production-ready inputs so teams can plan labor hours, schedule the work, or check whether the job fits the available shift time.

The inputs for this scenario

  • Devices to UDI-label this batch: 120 units (held at the documented default)
  • Labels applied and verified per minute: 12 units / min (held at the documented default)
  • Scanner setup, reprint, and GUDID delay allowance: 7.2 % (the input this scenario stresses; the baseline uses 10)

Working through the calculation

  • The calculation starts from the formula this tool documents: Base udi labeling workload time = udi labeling workload workload รท udi labeling workload completion rate.
  • Required udi labeling workload time works out to 10.72 hr at these inputs, and this is the headline figure for the scenario.
  • Base udi labeling workload time works out to 10 hr at these inputs.
  • Udi labeling workload allowance applied works out to 7.2 % at these inputs.
  • Udi labeling workload completion rate works out to 12 pieces / min at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where scanner setup, reprint, and gudid delay allowance sits at 10% and the headline result is 11 hr, this scenario comes in 2.55% below the baseline at 10.72 hr.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to scanner setup, reprint, and gudid delay allowance, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It assumes a single steady verified-labeling rate; mixed device families with different carrier types or Class III direct-part-marking will each need their own run.

Results at a glance

  • Required udi labeling workload time: 10.72 hr (headline result)
  • Base udi labeling workload time: 10 hr
  • Udi labeling workload allowance applied: 7.2 %
  • Udi labeling workload completion rate: 12 pieces / min

Run it with your numbers

  • To rerun this with your own numbers, open the live UDI Labeling Workload calculator, set scanner setup, reprint, and gudid delay allowance to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.