Reshoring & Tariff Strategy worked example

Trade Compliance Audit Load at 68% target compliance audit coverage rate: a worked example

This worked example runs the trade compliance audit load numbers for a tougher week than the baseline: 68% target compliance audit coverage rate instead of the typical 95%. Estimate trade compliance audit load for reshoring and tariff strategy using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Shipments flagged for compliance audit: 8 count (held at the documented default)
  • Total shipments in the review period: 250 count (held at the documented default)
  • Target compliance audit coverage rate: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Trade compliance audit load rate = trade compliance audit load count ÷ total trade compliance audit load population × 100.
  • Trade compliance audit load rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Trade compliance audit load gap to target works out to 64.8 points at these inputs.
  • Trade compliance audit load count works out to 8 count at these inputs.
  • Total trade compliance audit load population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target compliance audit coverage rate sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • Use it to size compliance audit workload, verify sampling coverage against policy, or report audit intensity to a trade-compliance committee. A result at this level usually justifies acting on the stressed input before touching anything else, because every other figure in the table is downstream of it.

Results at a glance

  • Trade compliance audit load rate: 3.2 % (headline result)
  • Trade compliance audit load gap to target: 64.8 points
  • Trade compliance audit load count: 8 count
  • Total trade compliance audit load population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Trade Compliance Audit Load calculator, set target compliance audit coverage rate to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.