Robotic End-of-Arm Tooling worked example

Validation Cycle Load with eoat validation rig connected load of 30 kW: a worked example

Push eoat validation rig connected load up to 30 kW and the picture changes. This example computes every intermediate figure at that operating point. Use it when validation cycle load in robotic end-of-arm tooling is up for an upgrade and you want a defensible savings story.

The inputs for this scenario

  • EOAT validation rig connected load: 30 kW (raised for this scenario; the documented default is 12)
  • Validation test runtime: 8 hr (unchanged)
  • Blended electricity rate: 0.12 $ / kWh (unchanged)
  • Units cycled during validation: 1,000 units (unchanged)

Working through the calculation

  • Applying the documented formula (Total validation cycle load energy cost = validation cycle load connected load × validation cycle load runtime × blended electricity rate) to the inputs above produces each figure below.
  • At this operating point the engine returns 240 kWh for validation cycle load energy used, the number this scenario is built around.
  • At this operating point the engine returns 28.8 $ for total validation cycle load energy cost.
  • At this operating point the engine returns 0.03 $ / piece for energy cost per kwh.
  • At this operating point the engine returns 3.6 $ / hr for hourly validation cycle load energy cost.

How this compares with the baseline

  • Against the tool's baseline example, where eoat validation rig connected load sits at 12 kW and the headline result is 96 kWh, this scenario comes in 150% above the baseline at 240 kWh.
  • It computes total validation energy in kWh, the dollar cost at your blended rate, and the energy cost allocated per unit cycled during the run. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Validation cycle load energy used: 240 kWh (headline result)
  • Total validation cycle load energy cost: 28.8 $
  • Energy cost per kWh: 0.03 $ / piece
  • Hourly validation cycle load energy cost: 3.6 $ / hr

Run it with your numbers

  • Every input above is editable in the live Validation Cycle Load calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.