Rotational Molding worked example
Oven Bottleneck at 99% oven availability × pass rate: a worked example
Push oven availability × pass rate up to 99% and the picture changes. This example computes every intermediate figure at that operating point. Use it when oven bottleneck in rotational molding is being committed and you need a throughput number you can defend.
The inputs for this scenario
- Good parts cleared through the oven: 1,200 units (unchanged)
- Oven cycle run time: 8 hr (unchanged)
- Oven availability × pass rate: 99 % (raised for this scenario; the documented default is 90)
Working through the calculation
- Applying the documented formula (Raw oven bottleneck = completed output ÷ runtime) to the inputs above produces each figure below.
- At this operating point the engine returns 149 units for effective throughput, the number this scenario is built around.
- At this operating point the engine returns 150 units for raw throughput.
- At this operating point the engine returns 99 % for efficiency.
- At this operating point the engine returns 8 hr for runtime.
How this compares with the baseline
- Against the tool's baseline example, where oven availability × pass rate sits at 90% and the headline result is 135 units, this scenario comes in 10% above the baseline at 149 units.
- It computes effective oven throughput by dividing parts cleared by oven run time, then scaling by availability and pass rate. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.
Results at a glance
- Effective throughput: 149 units (headline result)
- Raw throughput: 150 units
- Efficiency: 99 %
- Runtime: 8 hr
Run it with your numbers
- Every input above is editable in the live Oven Bottleneck calculator, which recalculates instantly and can be shared with the inputs intact.
Last reviewed 2026-05-12.