Security, Fire & Life Safety Products worked example

Regulatory Label Cost at 72% share of units carrying the listing mark: a worked example

Suppose share of units carrying the listing mark falls to 72%. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate regulatory labeling cost for listed fire and security products including printed UL marks, application, and one-time artwork setup.

The inputs for this scenario

  • Devices labeled this run: 3,000 units (held at the documented default)
  • Listing label material + apply cost: 0.42 $/unit (held at the documented default)
  • Share of units carrying the listing mark: 72 % (the input this scenario stresses; the baseline uses 100)
  • Listing artwork & plate setup: 400 $ (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Total = units x label & apply cost x listed-product share% + artwork setup.
  • Total regulatory label cost works out to 1,307 $ at these inputs, and this is the headline figure for the scenario.
  • Regulatory label cost per unit works out to 0.44 $ / piece at these inputs.
  • Variable regulatory label cost works out to 907 $ at these inputs.
  • Fixed regulatory label cost adder works out to 400 $ at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where share of units carrying the listing mark sits at 100% and the headline result is 1,660 $, this scenario comes in 21.25% below the baseline at 1,307 $.
  • It computes total and per-unit regulatory labeling cost as units times per-label cost times the listed-product share, plus a one-time artwork and plate setup charge. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Total regulatory label cost: 1,307 $ (headline result)
  • Regulatory label cost per unit: 0.44 $ / piece
  • Variable regulatory label cost: 907 $
  • Fixed regulatory label cost adder: 400 $

Run it with your numbers

  • To rerun this with your own numbers, open the live Regulatory Label Cost calculator, set share of units carrying the listing mark to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.