Sheet Metal Stamping & Press Lines worked example
Press Utilization at 99% target utilization benchmark: a worked example in sheet metal stamping & press lines
Push target utilization benchmark up to 99% and the picture changes. This example computes every intermediate figure at that operating point. Use it when press utilization in sheet metal stamping and press lines needs a clean rate and gap-to-target you can put on a tier board.
The inputs for this scenario
- Press hours actually running strokes: 8 units (unchanged)
- Total scheduled press hours available: 250 units (unchanged)
- Target utilization benchmark: 99 % (raised for this scenario; the documented default is 95)
Working through the calculation
- Applying the documented formula (Press Utilization rate = affected amount รท total amount) to the inputs above produces each figure below.
- At this operating point the engine returns 3.2 % for rate, the number this scenario is built around.
- At this operating point the engine returns 95.8 points for gap to target.
- At this operating point the engine returns 8 count for affected count.
- At this operating point the engine returns 250 count for total count.
How this compares with the baseline
- Against the tool's baseline example, where target utilization benchmark sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
- It computes the ratio of running press hours to total scheduled hours and the point gap to your target utilization. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.
Results at a glance
- Rate: 3.2 % (headline result)
- Gap to target: 95.8 points
- Affected count: 8 count
- Total count: 250 count
Run it with your numbers
- Every input above is editable in the live Press Utilization calculator, which recalculates instantly and can be shared with the inputs intact.
Last reviewed 2026-05-12.