Space Payload & Avionics Manufacturing worked example

Inspection Bottleneck with inspection defect severity of 3 score: a worked example in space payload & avionics manufacturing

Here is what the math looks like when conditions slip. We hold every other input steady and drop inspection defect severity to 3 score, then walk the calculation through step by step. Estimate inspection bottleneck for space payload and avionics manufacturing using production-ready inputs so teams can rank risks and decide which issue needs containment, controls, or escalation first.

The inputs for this scenario

  • Inspection defect severity (impact if missed): 3 score (the input this scenario stresses; the baseline uses 6)
  • Inspection defect occurrence frequency: 4 score (held at the documented default)
  • Inspection escape detectability: 3 score (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Inspection bottleneck risk score = inspection bottleneck severity score × inspection bottleneck occurrence score × inspection bottleneck detection score.
  • Inspection bottleneck risk score works out to 3.35 score at these inputs, and this is the headline figure for the scenario.
  • Inspection bottleneck severity score works out to 3 score at these inputs.
  • Inspection bottleneck occurrence score works out to 4 score at these inputs.
  • Inspection bottleneck detection score works out to 3 score at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where inspection defect severity sits at 6 score and the headline result is 4.55 score, this scenario comes in 26.37% below the baseline at 3.35 score.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to inspection defect severity, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. RPN treats a 6x1x1 and a 1x6x1 case as very different even when the product is equal, so always read the three sub-scores, not just the total, before acting.

Results at a glance

  • Inspection bottleneck risk score: 3.35 score (headline result)
  • Inspection bottleneck severity score: 3 score
  • Inspection bottleneck occurrence score: 4 score
  • Inspection bottleneck detection score: 3 score

Run it with your numbers

  • To rerun this with your own numbers, open the live Inspection Bottleneck calculator, set inspection defect severity to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.