Specialty Films, Membranes & Barrier Materials worked example

Supplier Risk with supplier failure severity of 3 score: a worked example in specialty films, membranes & barrier materials

Suppose supplier failure severity falls to 3 score. This page works the full calculation at that level so you can see exactly which result moves and by how much. Estimate supplier risk for specialty films, membranes and barrier materials using production-ready inputs so teams can rank risks and decide which issue needs containment, controls, or escalation first.

The inputs for this scenario

  • Supplier failure severity: 3 score (the input this scenario stresses; the baseline uses 6)
  • Supply disruption occurrence: 4 score (held at the documented default)
  • Incoming-defect detection strength: 3 score (held at the documented default)

Working through the calculation

  • The calculation starts from the formula this tool documents: Supplier risk score = supplier risk severity score × supplier risk occurrence score × supplier risk detection score.
  • Supplier risk score works out to 3.35 score at these inputs, and this is the headline figure for the scenario.
  • Supplier risk severity score works out to 3 score at these inputs.
  • Supplier risk occurrence score works out to 4 score at these inputs.
  • Supplier risk detection score works out to 3 score at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where supplier failure severity sits at 6 score and the headline result is 4.55 score, this scenario comes in 26.37% below the baseline at 3.35 score.
  • It multiplies supplier failure severity, supply disruption occurrence, and incoming-defect detection strength into a single supplier risk priority number. When the numbers land here, the stressed input is the lever to work; the walkthrough above shows exactly how much each output recovers as it climbs back toward the baseline.

Results at a glance

  • Supplier risk score: 3.35 score (headline result)
  • Supplier risk severity score: 3 score
  • Supplier risk occurrence score: 4 score
  • Supplier risk detection score: 3 score

Run it with your numbers

  • To rerun this with your own numbers, open the live Supplier Risk calculator, set supplier failure severity to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.