Stone, Countertops & Engineered Surfaces worked example

Template-To-Install Lead Time with slab and consumable stock on hand of 3,000 units / day: a worked example

Push slab and consumable stock on hand up to 3,000 units / day and the picture changes. This example computes every intermediate figure at that operating point. Use it when template-to-install lead time in stone, countertops and engineered surfaces is being sized for a buffer or safety stock review.

The inputs for this scenario

  • Slab and consumable stock on hand: 3,000 units / day (raised for this scenario; the documented default is 1,200)
  • Template-to-install lead time: 85 days (unchanged)
  • Safety stock multiplier: 1.1 units (unchanged)

Working through the calculation

  • Applying the documented formula (Template-to-install lead time cycle stock = template-to-install lead time daily usage × template-to-install lead time lead time) to the inputs above produces each figure below.
  • At this operating point the engine returns 32.09 days for protected days of supply, the number this scenario is built around.
  • At this operating point the engine returns 35.29 days for unprotected days.
  • At this operating point the engine returns 3,000 pieces for inventory.
  • At this operating point the engine returns 85 pieces / day for daily usage.

How this compares with the baseline

  • Against the tool's baseline example, where slab and consumable stock on hand sits at 1,200 units / day and the headline result is 12.83 days, this scenario comes in 150% above the baseline at 32.09 days.
  • It computes protected and unprotected days of supply from inventory on hand, daily usage, and a safety factor for the template-to-install pipeline. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.

Results at a glance

  • Protected days of supply: 32.09 days (headline result)
  • Unprotected days: 35.29 days
  • Inventory: 3,000 pieces
  • Daily usage: 85 pieces / day

Run it with your numbers

  • Every input above is editable in the live Template-To-Install Lead Time calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.