Tooling, Fixtures, Dies & Mold Economics worked example

Fixture Utilization at 98% target fixture utilization: a worked example in tooling, fixtures, dies & mold economics

This scenario runs the fixture utilization calculation on the strong side: 98% target fixture utilization, with every other input held at its documented default. Use it when fixture utilization in tooling, fixtures, dies and mold economics is being reviewed for asset utilization in tooling, fixtures, dies and mold economics.

The inputs for this scenario

  • Hours the fixture was in productive use: 360 value (unchanged)
  • Hours the fixture was available to run: 480 value (unchanged)
  • Target fixture utilization: 98 % (raised for this scenario; the documented default is 85)

Working through the calculation

  • Applying the documented formula (Fixture utilization = used fixture utilization amount รท available fixture utilization amount) to the inputs above produces each figure below.
  • At this operating point the engine returns 75 % for fixture utilization, the number this scenario is built around.
  • At this operating point the engine returns 23 points for fixture utilization gap.
  • At this operating point the engine returns 360 value for used fixture utilization amount.
  • At this operating point the engine returns 480 value for available fixture utilization amount.

How this compares with the baseline

  • Against the tool's baseline example, where target fixture utilization sits at 85% and the headline result is 75 %, this scenario lands almost exactly on the baseline at 75 %.
  • Use it when deciding whether to buy a duplicate fixture, freeing a bottleneck, or auditing whether expensive workholding is paying back. Treat this as a target state: the delta against the baseline quantifies what the improvement is worth before you commit to chasing it.

Results at a glance

  • Fixture utilization: 75 % (headline result)
  • Fixture utilization gap: 23 points
  • Used fixture utilization amount: 360 value
  • Available fixture utilization amount: 480 value

Run it with your numbers

  • Every input above is editable in the live Fixture Utilization calculator, which recalculates instantly and can be shared with the inputs intact.

Last reviewed 2026-05-12.