Traceability, Serialization & Lot Genealogy worked example

Scan Compliance Rate at 68% target scan compliance level: a worked example

Here is what the math looks like when conditions slip. We hold every other input steady and drop target scan compliance level to 68%, then walk the calculation through step by step. Estimate scan compliance rate for traceability, serialization and lot genealogy using production-ready inputs so teams can track KPI performance and decide whether corrective action is needed.

The inputs for this scenario

  • Scans that met the compliance rule: 8 count (held at the documented default)
  • Total required scan events: 250 count (held at the documented default)
  • Target scan compliance level: 68 % (the input this scenario stresses; the baseline uses 95)

Working through the calculation

  • The calculation starts from the formula this tool documents: Scan compliance rate = scan compliance rate count ÷ total scan compliance rate population × 100.
  • Scan compliance rate works out to 3.2 % at these inputs, and this is the headline figure for the scenario.
  • Scan compliance rate gap to target works out to 64.8 points at these inputs.
  • Scan compliance rate count works out to 8 count at these inputs.
  • Total scan compliance rate population works out to 250 count at these inputs.

How this compares with the baseline

  • Against the tool's baseline example, where target scan compliance level sits at 95% and the headline result is 3.2 %, this scenario lands almost exactly on the baseline at 3.2 %.
  • The practical read: the gap between this scenario and the baseline is entirely attributable to target scan compliance level, so recovering it is worth quantifying in dollars before considering equipment or staffing changes. It only reflects the scans in the population you count; if unrecorded skips never enter the total, the true compliance rate is worse than reported.

Results at a glance

  • Scan compliance rate: 3.2 % (headline result)
  • Scan compliance rate gap to target: 64.8 points
  • Scan compliance rate count: 8 count
  • Total scan compliance rate population: 250 count

Run it with your numbers

  • To rerun this with your own numbers, open the live Scan Compliance Rate calculator, set target scan compliance level to your actual value, and adjust the remaining inputs to match your operation.

Last reviewed 2026-05-12.