Trailers, Truck Bodies & Specialty Vehicles worked example
Line Balance at 99% line balance efficiency: a worked example in trailers, truck bodies & specialty vehicles
Push line balance efficiency up to 99% and the picture changes. This example computes every intermediate figure at that operating point. Use it when line balance in trailers, truck bodies and specialty vehicles is being committed and you need a throughput number you can defend.
The inputs for this scenario
- Trailers completed off the line: 1,200 units (unchanged)
- Scheduled line runtime: 8 hr (unchanged)
- Line balance efficiency: 99 % (raised for this scenario; the documented default is 90)
Working through the calculation
- Applying the documented formula (Raw line balance = completed output รท runtime) to the inputs above produces each figure below.
- At this operating point the engine returns 149 units for effective throughput, the number this scenario is built around.
- At this operating point the engine returns 150 units for raw throughput.
- At this operating point the engine returns 99 % for efficiency.
- At this operating point the engine returns 8 hr for runtime.
How this compares with the baseline
- Against the tool's baseline example, where line balance efficiency sits at 90% and the headline result is 135 units, this scenario comes in 10% above the baseline at 149 units.
- It divides completed output by runtime to get raw hourly throughput, then multiplies by line efficiency to get the effective throughput you can plan around. The value of this scenario is the size of the gap it exposes: that gap, priced out over a year, is the budget you can justify spending to close it.
Results at a glance
- Effective throughput: 149 units (headline result)
- Raw throughput: 150 units
- Efficiency: 99 %
- Runtime: 8 hr
Run it with your numbers
- Every input above is editable in the live Line Balance calculator, which recalculates instantly and can be shared with the inputs intact.
Last reviewed 2026-05-12.